STINK FREE DEEP CLEAN
Stain & Odor Remover for Pet Accidents
STINK FREE DEEP CLEAN is a professional strength stain and odor remover that is formulated specifically to neutralize and remove pet stains, odors and contamination from carpets and fabric. It contains an integrated system of odor neutralizers that breaks down and converts pet contamination into odorless, inert substances. Five powerful cleaning agents separate contamination from the carpet or fabric, suspend it in solution and foam it to the surface for removal by blotting. DEEP CLEAN PERMANENTLY removes stain and odor (including the odors that only pets can smell), and leaves carpets and fabric smelling and looking clean and fresh - Results Guaranteed!
What is the difference between STINK FREE DEEP CLEAN, and STINK FREE URINE ODOR REMOVER? Urine Odor Remover is a LEAVE-IN urine-odor deodorizer that you apply and LEAVE IN to completely and thoroughly deodorize urine odor. DEEP CLEAN is a STAIN REMOVER AND ODOR deodorizer; with DEEP CLEAN you apply, scrub in to suspend contaminants, then blot out with fresh cloths until the contamination is gone. Both products completely, permanently and thoroughly remove urine odor when used properly.
Use Full Strength – DO NOT DILUTE. Do not use in a spray applicator on carpets, upholstery or similar surfaces. Urine is a hot liquid that leaves your pet at over 100 degrees, and quickly spreads UNDERNEATH carpet and INTO upholstery. Surface spraying will NOT sufficiently reach and neutralize deep contamination.
Directions:
1) IMPORTANT! Remove any solid residue and blot up excess moisture. Check for color fastness. If carpet is not colorfast, do not use.
2) saturate the contaminated area.
(NOTE: For urine contamination, saturate an area much larger than the surface stain, to saturate all the contamination that has spread UNDER the carpet. Wait 4 to 5 minutes for solution to break down the contamination. (BE PATIENT).
3)Using a soft clean white cloth, vigorously rub the area into a foam, then blot up. Repeat this process 3 to 4 times until stain and contamination have been removed.
4) For urine contamination, COMPLETELY resaturate the area to provide additional solution to break down, separate and lift up any remaining residual contamination. Wait 2 to 3 minutes, blot HARD and then let air dry. DONE!
Recommended Practice for Best Results: After the stain and odor have been removed and the area is completely dry, wipe down the area with clean water to remove surface cleaning agents. If surface cleaning agents are not removed, they will continue to work, (cleaning the bottoms of feet and shoes) and the area will become RE-soiled more easily. This is an advisable practice with ANY cleaning solution.
**IMPORTANT! For thick materials, such as carpets, saturate an area wider than the surface stain. Urine is absorbed both horizontally and vertically, in a pyramid-like pattern (see illustration) which makes the contaminated area below the surface larger than the surface stain.
Works for All Urine Odors
Non-Toxic, Non-Flammable, Biodegradable
*This oxidation process is the same proven, odor-control process used by both government and industry (water treatment, waste water treatment, food processing and many other applications) where biological contamination and odor are a serious problem.
32-oz Bottle. Fresh scent.
